| DCC CONTROL • POINT MOTORS • WIRING |
EMPOWERING THE LAYOUT Your layout.
Under control.Enjoy every operating session. Explore DCC controllers, smooth point control and the wiring essentials that help keep your railway running reliably. |
| FREE mainland UK postage on online orders £150+ |
DCC CONTROLLERS Put yourself in the driving seat.Starting with DCC or upgrading your control system? Find the right setup for the way you like to run your trains. |
 | COMPLETE DCC STARTER SET NCE Power Cab
DCC Starter SetTake your first steps into DCC with a complete handheld system. The UK power supply and connection panel are included, putting independent locomotive control in the palm of your hand. UK power supply included. NCE5240042 RRP £269.95 NOW £194.99 |
|
WIRELESS DCC CONTROL |  | GMI-D02 Gaugemaster Infinity
Digital PlusMove freely around your layout with the included wireless handset. A 6A output, 68 locomotive functions and expandable control give you room to grow. Includes one wireless handset and UK power supply. | RRP £495.00 NOW £420.76 |
| GET STARTED WITH DCC |  | DCC01 Gaugemaster
Prodigy ExpressA straightforward introduction to DCC for smaller layouts. This complete package includes the base station, walkaround handset and power supply. DCC point control requires an additional DCC14 handset, available separately. | RRP £315.00 NOW £267.75 |
|
|
7-INCH COLOUR TOUCHSCREEN • 6A CONTROL |  | ESU50220 ESU ECoS 2.5 Command StationTake charge of a growing layout with a 7-inch colour touchscreen, twin motorised throttles and an integrated 6A booster. Control locomotives, points and routes from one command station. Includes a 150W power supply, adjustable from 15–21V. RRP £663.04 NOW £595.00 |
|
 | CONTROLLER CADDY A handy home for
your controllerKeep your handset within reach between moves. This useful holder suits NCE, Gaugemaster Prodigy and many similar handsets, as well as smartphones. Holder only; controllers shown are not included. DCC-CC1 RRP £6.95 NOW £5.91 |
|
POINT MOTORS Smooth, realistic point control.Choose analogue or digital Cobalt iP motors, with six-packs for your next project and a 13-motor pack for bigger plans. |
ANALOGUE • 6 PACK |  | DCP-CB6iP Cobalt iP Analogue
Point MotorsBring smooth, realistic movement to your points with six slow-action motors. Built-in switching and mounting accessories help you get everything installed. For DCC commands, add a suitable accessory decoder separately. | RRP £119.95 NOW £101.96 |
| DCC DIGITAL • 6 PACK |  | DCP-CB6DiP Cobalt iP Digital
Point MotorsOperate six points with smooth, slow-action movement. Each motor has a built-in DCC decoder, with mounting accessories and frog-switching connections included. For DCC operation, use a system with accessory control. | RRP £179.95 NOW £152.96 |
|
|
 | COBALT iP DIGITAL • 13 MOTORS Building bigger?
Buy 12 - get 1 FREEPlan ahead with 13 Cobalt iP Digital point motors for the price of 12. Each has a built-in DCC decoder, with installation accessories included for all 13. 13-motor pack • Built-in DCC decoders. DCP-CB12DiP-1 12-pack RRP £339.95 NOW £288.96 |
|
COBALT-S LEVER CONTROL Squeeze the catch.
Set the road.Bring the feel of a traditional signal box to your layout. Solid brass levers, working locking catches and a satisfyingly tactile action make setting points and signals a rewarding part of every operating session. |
 | 12 LEVERS + NCE INTERFACE Cobalt-S Signalbox
Control PackConnect a physical lever panel to your NCE system. This pack includes twelve Cobalt-S levers, a 12-input Alpha encoder and the Alpha connection cable. For NCE systems. Other systems require the Alpha DCC System Power Upgrade Bundle, sold separately. DCD-LCP RRP £399.99 NOW £339.99 |
|
SIX LEVERS + ACCESSORIES |  | DCP-CBS6 Cobalt-S Levers
6 PackCreate a compact lever bank for your station or yard. Six Cobalt-S levers with working locking catches, wiring harnesses and installation accessories bring every movement to life. Lever pack only: Alpha encoder and NCE cable not included. | RRP £159.99 NOW £135.99 |
| TWELVE LEVERS + ACCESSORIES |  | DCP-CBS12 Cobalt-S Levers
12 PackThe same satisfying Cobalt-S action, with twice as many levers for a larger control panel. Twelve levers, wiring harnesses and installation accessories give you room for more points and signals. Lever pack only: Alpha encoder and NCE cable not included. | RRP £309.99 NOW £263.49 |
|
|
The difference: DCP-CBS6 and DCP-CBS12 contain six or twelve of the same Cobalt-S lever, with installation accessories. DCD-LCP adds the Alpha encoder and connection cable to a twelve-lever pack for NCE control. Point motors and accessory decoders are sold separately. |
USEFUL LAYOUT UPGRADES More reliable running starts here.Help reduce power interruptions and unwanted voltage spikes with these useful additions to a compatible DCC layout. |
HELP REDUCE INTERRUPTIONS |  | DCC-LSP DCC Surge
ProtectorHelp reduce nuisance DCC shutdowns and sound-decoder resets caused by brief shorts and power-on surges on compatible smaller layouts. Maximum bus current: 1.5A. Check suitability for your layout. | RRP £19.95 NOW £16.96 |
| 2 PACK |  | DCC-BSS.2 Bus Spike
SuppressorsAdd voltage clamping and filtering to your DCC track-power bus. These compact suppressors help reduce unwanted voltage spikes. Two suppressors per pack. | RRP £10.95 NOW £9.31 |
|
|
WIRE IT WELL Layout building essentials - our top picksA tidy wiring job starts with the right small parts. Stock up on connectors, insulation and terminal tags for your next layout project. |
SOLDER-FREE • 12 PACK |  | DCW-iLSS.12 i-Link 1-in / 3-out
ConnectorsDistribute power neatly with reusable connectors. Separate orange and blue blocks make your wiring circuits easy to follow. One terminal in and three out per block. | RRP £9.95 NOW £8.46 |
| SOLDER-FREE • 6 PACK |  | DCW-iLCS.6 i-Link 2-pole
ConnectorsKeep two-wire feeds organised with reusable, colour-coded connectors that bring both circuits together in one compact block. Two terminals in and six out per block. | RRP £9.95 NOW £8.46 |
|
|
SOLDER-FREE • 12 PACK |  | DCW-iLT.12 i-Link TEE
ConnectorsSplit your track power bus without soldering. Reusable TEE connectors make it easy to feed a bus running in two directions. Six orange and six blue connectors. | RRP £9.95 NOW £8.46 |
| 2mm • 36 PACK |  | DCW-MHS.BK Black Micro
HeatshrinkInsulate fine-wire joints neatly with this handy pack of black heatshrink. A useful finishing touch for tidy layout wiring. 36 pieces of 2mm heatshrink. | RRP £3.95 NOW £3.36 |
|
|
 | TIDIER WIRING • 25 PACK Power Bus
Terminal TagsSecure your power bus without cutting it, then solder droppers to the pre-tinned eyelets for tidy, accessible connections beneath the baseboard. 25 tags per pack. DCC-Tag25 RRP £8.95 NOW £7.61 |
|
MAKE EVERY CONNECTION COUNT Don’t forget the soldering iron.Give your track a dependable electrical feed with properly soldered dropper wires. |
 | WORKBENCH ESSENTIAL 65W Soldering IronAn essential tool for soldering dropper wires to track for reliable electrical connections. Adjustable temperature gives you control for layout wiring jobs. Includes an extra 2mm tip and a stand with sponge. DCS-AT571 RRP £29.95 NOW £25.46 |
|
PREPARE YOUR RAIL FOR SOLDERING Clean rail. Better solder joints.Before soldering dropper wires, clean the rail at each connection point. These fibreglass brushes help prepare the surface for a reliable solder joint. |
4mm • MEDIUM BRUSH |  | DCT-FBS Medium Fibreglass
BrushPrepare your rail for soldering with this versatile 4mm fibreglass brush. Its twist mechanism lets you adjust the exposed brush length. Useful for cleaning rail at dropper connection points. | RRP £6.95 NOW £5.91 |
| 2mm • FINE BRUSH |  | DCT-FBSF Fine Fibreglass
BrushClean small areas of rail precisely with this fine 2mm brush. Its propelling-pencil design gives you comfortable control for detailed preparation work. Body colour may vary from the illustration. | RRP £13.95 NOW £11.86 |
|
|
 | MEDIUM REFILLS • 10 PACK Medium Fibreglass
Brush RefillsKeep your medium fibreglass brush ready for the next wiring job with this handy pack of ten replacement refills. Refills only, for the medium brush. DCT-FBLG RRP £11.95 NOW £10.16 |
|
Ready for your next layout project?Explore more control equipment and accessories at TMC. |
| Prices and availability are subject to change. See product pages for full details. |
|
