PL-55 Peco Turntable Motor (for ALL Peco Turntables)
£73.70
£73.70
Details
TURNTABLE MOTOR
Non-indexing turnatable motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck against the exit or entrance road by eye, and the controls allow for small adjustments should things not align perfectly. This gives the modeller ultimate flexibility and control, and means that existing turntables on layouts can easily accommodate the new motor without any major track re-laying exercise! Power has to be provided from an independent 12vDC 2 amp supply, but other than that everything needed is included. Operating the motor is straightforward: you press and hold either of the clockwise or anti-clockwise buttons to rotate the deck and release the button when you wish to stop.
This turntable motor can be fitted to all existing PECO turntable kits (N, OO/HO, O-16.5, SM-32, HOm). Instructions on fitting and use are included.
Power has to be provided from an independent 12vDC 2 amp supply (controller outputs are usually NOT suitable) but other than that everything needed is included. TMC Have a suitable PSU available and recommend getting one for the high current needed to operate the motor.
Operating the motor is straightforward: you press and hold either of the clockwise or anti-clockwise buttons to rotate the deck and release the button when you wish to stop. Operation is extremely smooth.
Retro-fitting the motor to an existing turntable in-situ is easy. The kit is supplied with three mounting fixtures that when assembled are glued to the underside of the turntable deck. There is also a special joining collar that links the motor to the central shaft of the turntable deck. Full instructions are included in the kit.
Manufacturer
Peco
Scale
OO Gauge (1:76 Scale)
Condition
New
Type
Track Automation