Short Descriptions

Each pre-wired, 0.6mm LED is carefully matched to prototype railway colours.

Pack contains:
6x Red/White Nano LEDs
6x Red/Green Nano LEDs
6x Proto White Nano LEDs
6x Sunny White Nano LEDs
6x Red Nano LEDs
6x Amber Nano LEDs
6x Green Nano LEDs
42x 1,000 Ohm (1K) Resistors
42x 5,000 Ohm (5K) Resistors
42x 15,000 Ohm (15K) Resistors

Total seperate selling price is £90.65

DCCconcepts Nano LED Value Pack – 42 Assorted Nano LEDs & Resistors

Sale
£67.96
£79.96
6 In Stock
Inclusive of all taxes
6 AVAILABLE
SKU#: LED-NLVP
Sale
£67.96
£79.96
6 In Stock
Inclusive of all taxes

Details

Super-high quality LED 4mm scale gas-style street/platform lamps in Maroon (3 pack)

Pack Contents

  • 3x 4mm scale street/platform lamps with 200mm connection wires
  • 3x Resistor boards – suitable for connection to regulated DC power 6-12V


Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

 

Manufacturer

DCC Concepts

Condition

New

Type

Lighting

DCCconcepts Nano LED Value Pack – 42 Assorted Nano LEDs & Resistors

Sale
£67.96
£79.96
6 In Stock
Inclusive of all taxes
6 AVAILABLE
SKU#: LED-NLVP
Sale
£67.96
£79.96
6 In Stock
Inclusive of all taxes